AKG Pro Audio C214 Stereo Set Condenser Microphone

• Sonic character of the c414 XLII for beautifully detailed recording of lead vocals and solo instruments
• Outstanding dynamic range and ultralow noise for close-up recording of high-output sources of up to 156db spl
• Switchable 20db attenuator and bass-cut filter for close-up recording and reduction of proximity effect
• Integrated suspension to reduce mechanical noise and vibration from stage
• Roadworthy design all-metal die-cast body with shock- and scratch-resistant finish

The C214 microphone has a one-inch capsule fitted onto an integrated suspension unit. This setup helps in the reduction of mechanical noise and dampening of vibrations in high-intensity stage environments. The generous dynamic range offered by this microphone enables close-range recording from high-output sources without distortion. Perfect Twins for stereo recording of any acoustic instruments in the studio and on stage. The C214 large-diaphragm condenser microphone has been designed as a cost-effective alternative to the high-end C

If you haven’t heard of AKG’s c 414, you’ve no doubt heard it. That baby is in practically every big recording studio around. It’s also a stage favorite. And a broadcast favorite. You get the picture. Why are we telling you all this? Because the AKG c 214 was made to be the cost-effective alternative to that high-end c 414, which is still made in Austria. So now all of us with a project studio can actually put that AKG sound to work on our recordings.

Specification

Microphone Type: CondenserMicrophone 

Polar Pattern: Cardioid 

Frequency Response: 20Hz - 20kHz 

Maximum SPL:1 36dB 

Output Impedance: 200 ohms 

Output: 3PinXLR 

Color: Matte Grayish Blue 

Power Source: Voltage 9 to 52 V 

Weight: 280 g 

Dimensions: W56mmx H160 mm

AKG C214 FEATURES

Sonic character of the C414 XLII

• For the beautifully detailed recording of lead vocals and solo instruments

Outstanding dynamic range and ultralow noise

• For the close-up recording of high-output sources of up to 156dB SPL

Switchable 20dB attenuator and bass-cut filter

• For close-up recording and reduction of proximity effect

Integrated suspension

• To reduce mechanical noise and vibration from the stage

Roadworthy design

• All-metal die-cast body with shock- and scratch-resistant finish

• Audio frequency bandwidth - 20 to 20000 Hz
• Equivalent Noise Level - 13 dB-A
• Sensitivity - 20 mV/Pa
• Signal to Noise - 81 dB-A
• Preattenuation Pad - -20 dB
• Bass Cut Filter - 160 Hz
• Electrical Impedance - 200 Ohms
• Polar Patterns - Cardioid
• Powering Interface - Voltage 9 to 52 V
• Audio Output Type - Balanced XLR

Origin of product: Hungary